The family of USB-stick analyzers ELAN ultra mark a new era in the field of mobile and modular instrumentation for PCs and notebooks. The successful launch of the 75 MHz USB oscilloscope USBscope50 was the starting point for the development of a complete family of USB based PC measurement technology in the USB flash drive format. Three new USB instruments, a 12.5 MHz function generator, a 100 MHz pulse/clock generator and a 50 MHz Frequenze / period counter expand the meter family with regard to the komplettierender test and analysis capabilities. Digital storage oscilloscope the USBscope50 is a digital storage oscilloscope with 75 MHz bandwidth. The USBscope50 can either or in conjunction with other modules as multi channel storage oscilloscope as a single storage Oscilloscopes work. On the side Kaskadierstecker up to 4 modules can zusammensteckt be.
Then you realize a multi channel storage oscilloscope with an analog bandwidth of 75 MHz per channel simultaneously. About the Kaskadierstecker all scope modules share the stage and the status of the trigger, the simultaneous Channel detection, as well as the common triggers. There are 3000 points per channel with pre – and post trigger available as acquisition memory. Every oscilloscope module is connected to the PC via a USB-HUB 4-channel with each a separate USB cable and can be configured by channel-specific. The USBscope50 is so compact that place it in a jacket pocket finds, offers however possibilities that offered generally by much larger models.
It is powered directly through the USB connector. As the probes can default x 1 or x 10 probes with BNC connectors are used. Depending on the sample type, the USBscope50 offers a range of 0.3V to 3V or 3V up to 300V at a galvanic separation of 300V according to Roland. The galvanic separation protects the connected PC surge from damage. The USB Scope50 can either be inserted directly into the USB port, see photo, or via a standard male-to-female USB-cable.