First page of the home archive


Posted by Juan on May 6, 2014 with Comments Closedas ,

So, Putzteufel in each corner come no matter whether phone, computer or electric shaver. More and more electronics works without cables. For devices with low power consumption, the use of batteries almost in each area is possible. But what about high-performance vacuum cleaners? The free online auction site has discovered on the international radio exhibition in Berlin models, work on battery power. Most vacuum cleaners deliver power over 1000 watts.

The higher the power, the more thoroughly the suction result. But what good is it if at the housecleaning some corners never get a vacuum cleaner to face, because no electrical outlet nearby is easy? His Ergorapido AEG uses a 12-volt lithium ion battery. Before the unit inside the charging base must, may be drawn for 20 minutes. The successor Ergorapido plus will be available from November in the trade. It enables a suction of 30 minutes with 18 volts. Alternatively, Miele is a hybrid solution.

In the cable operation the unit provides 1800 Watts and cleans almost any surface so. At the same time the integrated battery is charged. If necessary it is thus possible to on battery power to switch. But only for 20 minutes and a 600-Watt performance reduced. In addition, that the devices are still quite expensive. Miele is the most expensive price recommendation to dealers with 519 euro for the hybrid vacuum cleaner. AEG is 160 euro for the Ergorapido plus 210 euro for the Ergorapido.

Apartment Alarms

Posted by Juan on January 16, 2014 with Comments Closedas , ,

For clarity, the figure shows a typical 3-bedroom apartment. Symbols denote the location and type of occupancy sensors and elements of the alarm. To adapt the proposed scheme setup signaling his apartment just change the number of sensors in accordance with the number of rooms – gsm alarm Major-gsm Pro supports up to 160 wireless sensors to a single control panel. Alarm control panel alarm apartment Thus, the main element of the alarm apartment – the control panel. The control panel is a small "box" with a posting on her plate for kodonabornoy programming signal, a built-gsm module for sending alarm messages to gsm channel and the corresponding indication on the front panel.

Positioning the control panel should be hidden from a prospective attacker's site, but do not hide it too far, and most have access to it. Pay attention to the proximity of an outlet or other power source. Alarming detectors or sensors alarm for apartment All sensors are used to protect the apartments in the gsm alarm apartment can be divided into security sensors, and sensors continuously monitoring. Firstly, all the sensors considered here, signaling an apartment are wireless, which greatly simplifies the installation and connection to non-specialists. In fact, you can only decide on what you want to protect one or another room and take the appropriate wireless sensors.

Infrared wireless detector – motion detector. Refers to a series of wireless detectors. Catering is provided by built-in detector batteries. The detector is recommended for the walls of industrial and residential properties.