Posts Tagged ‘and Interior Design’

Choosing Stairs

Already at the stage of designing the house to prepare and discuss options for the stairs, so that it was convenient and comfortable for all occupants. Production of stairs, is a laborious process that requires a certain dexterity and skill. Very often during the construction placed a temporary metal frame ladder, and then, without distinction, his attempt to sheathe the tree. But this problem is difficult to implement, and would be cheaper to order a one-piece wooden staircase. A large area of the house, allows you to put solid concrete staircase.

And in the future zadekorirovat it to your liking. If the space for a ladder is not enough, we can provide U-shaped or screw with a triangular steps. But we should remember that the angle for a ladder must be about 35-40 , the maximum angle should not exceed 45 . Matter of convenience stairs, this addition also a security issue. Therefore, the ladder must have fencing. The distance between the balusters should be between 150 mm and the height of fences shall be not less than 850 millimeters. Recommended step width for stairs is 250-300 mm. On the security setting is also a great influence provides material levels.

For example, if they are made of smooth polished stone, it is worth the additional lay carpet, and fix it with special holders. The classic material for the steps already long time, is wood and stone. Currently there and ceramic monolithic step for facing ladders. Of course, building a ladder, it is important to use high-quality and safe materials. Wooden steps, as should normally be glued from separate bars which are placed on special technology. Stone can be used only cut from blocks, as well as the produced explosive way, sooner or later manifest itself cracks. Choosing material for a ladder, you need to do working drawings and full specifications of all the details of which it is made. Materials for the manufacture of the following steps: the pillars at the beginning and end of each march between them should be charged, followed by the balusters, and behind them the stages already. If the staircase is composed entirely of wood, then began to produce "bowstring", that is the basis. Rigidity of construction fencing provide supporting columns, section 80-120 mm, and the handrail. Balusters mostly bear decorative fencing function. It is worth a lot of attention paid to color and the staircase, he usually gets to the color of windows, doors, etc. In Later, if he does not like it, the cost of replacement is approximately the amount of new stairs. Since the ladder will have to dismantle, wash off the paint, sanded, painted and mounted again. Proper use of ladders – is another important component in the selection. It is not necessary to install the stairs in a closed room, where nobody lives, humidity drops them down to 0% and, consequently, the tree dries out, and the stairs just come into disrepair.

French Stretch Ceilings

Stretch ceiling is a special PVC film treated on the edges of the harpoon – a flexible plate used for mounting. If, however, a closer look at the classification, suspended ceilings are 2 kinds: the weld (Suture), as well as seamless. They vary a lot in their appearance: thus, if welded created several paintings, each two meters wide, with just a weld, the seamless stretch ceilings can be used on the square more than five meters. Welded stretch ceiling is made of a dense film, seamlessly – from polyester, but also additionally impregnated with polyurethane. Suture ceilings are made of different shades and colors Seamless – only matte, which subsequently applied to the desired image or color. The texture of stretch ceilings is quite diverse – glossy and matte, suede, velvet and metallic. Partly due to the fact that for such ceiling is possible to apply a pattern or image, this is essentially a unique finishing material is perfect for absolutely any interior space – from private apartments to the hypermarket. Unchanged leader Sales has for a long time considered French tension ceilings, which are manufactured using the latest manufacturing technology, which provides heat shrinkable film, which makes the material more flexible and flexible, but at the same time, strong and durable.

In recent years, and our domestic manufacturers began to produce materials that are not inferior in quality. This makes it possible to order the suspended ceiling directly at the manufacturing plant, and even at a very tolerable cost. Installation of suspended ceilings is as follows. Baguettes strengthen throughout the perimeter of the premises, and has been for them, with the help of a harpoon zaklipsyvaniem, mounted film. Hygiene, fire resistance, durability – is only a small part of the main advantages of suspended ceilings. Add to this impressive range of textures and colors, easy maintenance and aesthetics. Your choice will become obvious. Forget about the whitewashing and painting, ceiling tiles falling off and falling structural elements of suspended ceilings, choose the high quality and undeniable beauty suspended ceilings, which, with a special chic will underline the office or home interior design, as well as save you from unnecessary worries.