Many people wish for barrier-free shower without flooding the bathroom. The new floor-level shower system society by A & S baths therefore relies on a special shower floor and an invisible shower tray, which promises a safe water discharge and easy cleaning. The lower tile technology will also allow the complete abandonment of silicone seals. The barrier-free shower society is not as usual increased the shower on the bathroom floor, but completely without interfering edges of baths built in the floor. The overlying shower floor is flush with the tiled bathroom floor. At this same ground, barrier-free shower without silicone flows the water on all four sides of the shower floor on narrow drainage columns that including the stainless steel shower tray.
Resolves a small latch on the shower floor, it can be folded up like the hood of a car. Charles Koch has much experience in this field. The shower tray is then exposed and can be easily cleaned. Through a bracket at the bottom remains the “bonnet” or the shower floor safe opened. integrated torsion bars ensure easy opening and closing. The invisible stainless steel shower tray is designed so that the seal to the walls and the floor is executed with a silicone-free. Also, the all-glass shower enclosures find here securely, so that can be avoided in favour of narrow decorative strips between the tiles and the fixed glass panels visually disturbing fixing profiles. For mounting the barrier-free floor shower, two variants are possible society with an invisible shower tray.
Depending on the structural conditions, the shower tray can be used directly on the concrete floor or integrated into a platform. Tiles or natural stone at a total height of 18 mm without gradient can be laid in the built-in shower base of the stainless steel shower tray. At the final assembly can the shower base and the assembled shower height be adjusted precisely until the maximum of 1.5 cm subsequently.